China Coal & Mining Expo 2023
Beijing Coal Mining and Transportation Exhibition
Peru Mining Exhibition is here!
We came to Arequipa, Peru to participate in the 38th Perumin Mining Exhibition, which attracted conveyor belt manufacturers from all over the world, all of whom are strong competitors. We like this atmosphere very much, where we can fully display ourselves and Conduct comprehensive studies and improve yourself. In future exhibitions, customers will see us more and more often.
Zhengzhou BAI-OTT New Material Co., Ltd came to Ordos to participate in the coal exhibition.
China Coal Mine Exhibition, we fully demonstrated the advantages of our products.
Conveyor belt cleaner bring much benefits for conveyor belt
Conveyor belt too dirty? The construction environment is not ideal? Maybe our cleaner can help you. Zhengzhou Bioouter has been in the professional field for 20 years and has mature technical support. Please trust our cleaner, it will bring you a different experience.
The Mining & Construction Vietnam Exhibition from October 4 to 6, 2022
The Mining & Construction Vietnam Exhibition from October 4 to 6, 2022 was carried out smoothly.
Thank you for your attendance, which made our visit to the Vietnam exhibition fruitful.
Thanks to our customers for their praise of "the booth is very beautiful and the samples are very rich, which makes our trip worthwhile".
Testimonials from customers:
Ceramic lagging sheet - The texture of the ceramic particles is very good, and the rubber layer feels very good.
Diamond lagging sheet - the pattern is neatly engraved, and the adhesive layer feels fine.
Impact bar - from the polyurethane layer, the rubber layer to the aluminum profile, the workmanship is very fine and the texture is very good.
Mechanical Joints - The rubber layer has a good texture, fine workmanship, and the details inside the rubber are perfect.
Rivet lacing - whether it is the appearance or the result after the test, it does not lose to the big international brands.
Repair/Joint Tool -Buffing Disc - Very fine workmanship, fine grained, evenly distributed, purchased immediately after field testing.
and many more. . .
Bai-Ott is looking forward to meeting you next time.
How to operate conveyor belt hot vulcanization
Conveyor belt joints are currently divided into three types: mechanical joints, cold vulcanization joints, and hot vulcanization joints. After a long-term practical test, the best application effect is the hot vulcanized joint. The mechanical joint is prone to cause scratch on the belt while the cold vulcanization joint is limited to cold adhesives. Once the adhesive is selected improperly, it will cause scratch to the joint surface for the cold vulcanization joint is greatly affected by the transportation volume. The hot vulcanization joint is a method of heating and pressurizing the joint part of the conveyor belt with the help of a vulcanizing machine.
Conveyor belt vulcanization joint operation process
1.Find a right angle at the joint of the conveyor belt, cut one end of the belt into an even edge, and fix the belt with a G-shaped card.
2.Use a knife to gently make a scratch at 820mm from the position without adhesive to the alined edge, and make a light cut to the break (820mm and 800mm each, be careful not to cut the first layer of cloth), use a knife to gently cut the surface rubber, use pliers to tear off the rubber on the surface of the break. Use a knife to cut the first layer of cloth in the middle of the break, poke the first layer of cloth with a peeling hook, and gently make a scratch longitudinally to tear off the surface rubber and the first layer of cloth. Use a knife to gently scribble a knife at 600mm, 400mm, and 200mm to create a break, and divide it into four countertops in turn according to this process. Be careful not to hurt the lower layer of cloth during the process of piercing and tearing the cloth.
3.Use a knife to flat the adhesive in the edge, so that it will be flat with the 4 fabric steps. Score 20mm on the back of the end of this connector and peel off the skin. Use a sander to polish off the residual rubber on each layer of cloth, including the rubber on the edge of the joint and the rubber on the back. Be careful not to damage each layer of cloth, and then use a tungsten carbide disc to clean the splicing surface.
4. After grinding, remove the dust and debris on the surface of the belt joint.
5. Clean up the debris on the vulcanizing plate of the workbench, and overlap the two leading wedge fingers. Recheck the centerline of both ends and adjust it to a straight line.
6. Clean the conveyor belt head with cleaning agent, and brush the wedge-shaped fingers with hot vulcanizing agent once. Pay attention to the brushing evenly. After drying, align the belt body according to the pre-marked mark, and cross-lap the wedge-shaped fingers. Press lightly with both hands to check whether the bottom layer of the joint is also flat and stretched, and smear the surface of the joint with hot vulcanizing agent 2-3 times, so that the hot vulcanizing agent can fully penetrate into the connection gap in the wedge-shaped joint to ensure the wedge-shaped tight connection.
7.Spread the uncured core rubber on the joint part, and try to spread it as flat as possible. It is recommended to make two cuts on the uncured core rubber with a wallpaper knife to avoid bulging, and then stick the joint part with the cover rubber.
8.Use a Super Lightweight Vulcanizing Machine, press the vulcanizing plate and crossbeams, fasten the bolts, check the vulcanization and control, power supply, etc., and turn on the vulcanizing machine.
9.Warm reminder: The vulcanization temperature should be controlled at 145℃. After the vulcanization joint of the conveyor belt reaches the vulcanization time, the pressure drop must be adopted to reduce the vulcanization temperature below 40℃ before the equipment can be dismantled.
I believe that you will have a relatively deep understanding of the vulcanized joints of conveyor belts through the above construction case analysis. Please call us if you have questions about the splicing vulcanization process and the procurement of tools. We will definitely provide you with detailed construction solution.
New Product of Tyre Regroover
New Product of Tyre Regroover
Tyre regroover is used for rubber regrooving. The adjustable bladeholders allow any cutting profile, and can be used with any blade type on the market.
After a period of research, the new Tyre Regroover machine will be on the market. The new Tyre Regroover machine is small in weight, light in volume, and more comfortable in operation, but also has the same advantages.
Usage:
1.Tyre regroover machine designed for comfortable operating and maximum grooving maneuverability.
2.Only a slight amount of pressure is needed in order for the Micro-Switch controlled cutting heads to activate the heating element.
3.Blades are fed ,the exact amount of energy required for smooth effortless cutting.
4.It is an easy to use comfortable pocket-sized tool for re-grooving rubber sheet and tyres.
5. Portable regrooving machine is an easy to use and comfortable pocket-sized tool for regrooving tyres and rubber sheet.
Two-in-one/three-in-one Ceramic Rubber Composite Liner
Ceramic liner, which is mainly used to produce alumina and zirconia wear-resistant ceramic liner, ceramic rubber composite liner, three in one wear-resistant ceramic liner and other products, has the function of abrasion resistance, impact resistance and high temperature resistance. And it can run in 0℃-250℃ for a long time with the function of acid and alkali resistance as the rubber adopts the new formula of acid and alkali resistant rubber, which can resist weak acid and weak alkali;Anti-shedding, easy installation and replacement, super wear resistance greatly reduce maintenance frequency, cost and labor saving.
Basic parameters of rubber
Tensile strength(Mpa)
≥14
Break Extension(%)
≥500%
Shore hardness(Shore A)
60±5
Rubber and ceramic adhesion force(Mpa)
6
Operating temperature(℃)
-40-150℃
Ceramic clearance(mm)
0.8-2.0
Rubber edge(mm)
1.5-2.0
Ceramic rubber composite liner has two in one and three in one type. Two in one type refers to ceramic rubber composite plate, three in one type refers to ceramic rubber steel composite plate.The three-in-one composite plate comes with bolts for easy installation.
【Connection】 Glue or bolt the composite plate to the inner shell of the equipment with high strength organic adhesive or bolt to form a strong, cushioning anti-wear layer.
【Application】Adapt to humidity -40-100℃ of various equipment and anti-wear lining of pipeline, such as blanking tank, hopper, chute, forklift shovel, coal leakage hopper, ball mill import and export pipeline, coal pipeline, etc.
【Features】
Impact resistance:Good buffering performance can effectively buffer the impact of falling from a high attitude.As the main raw material of the product is alumina, the simple wear-resisting ceramic liner has wear-resisting performance, but its toughness is insufficient. When the impact reaches a certain degree, wear-resisting composite liner must be used.
Easy construction:No clearance after installation.Rubber composite liner can be twisted, cut and it is suitable for installing various special-shaped equipment.
Anti-keep or anti-block the materials:Because of the high strength and corrosion resistance of ceramic, the phenomenon of equipment keeping and blocking material is effectively solved.Traditional nylon liner often keeps material, which affects work efficiency.
The ceramic rubber composite liner has strong abrasion resistance, impact resistance and corrosion resistance.Rubber elastomer has excellent shock absorption effect and can reduce the noise of material transportation and production.
The density of ceramic rubber composite liner is lower than steel plate. With light weight and its high wear resistance, there is no need to be replaced often, which saves a lot of time cost for enterprises.
Belt fastener for shipment
Stainless steel conveyor belt fastener
Conveyor belt fastener is a quick conveyor belt connection method, mechanical belt splice will help your conveyor belt running as soon as possible.
Impact bed installation for Chile
The Impact Bed is mainly used to replace the buffering idler. The Impact Bed is composed of the buffer strip,which mainly uses the excellent high elastic special rubber layer to absorb the impact force of the material falling effectively and greatly reduce the impact on the conveyor belt. It really improves the force condition of the blanking point.